MBI CoreTi™


Sold Out

Important: Orders will take approx. 1 week to fulfill

← Continue Shopping

MBI CoreTi™ - "The worlds thinnest titanium flashlight!"

Perhaps the sleekest and most elegant flashlight on the planet, you'd be forgiven for thinking this was an exquisite item of jewellery.

An incredible amount of work goes into forging each individual CoreTi™ from a solid titanium block, followed by polishing, finishing assembly and then more of the polish and finish to a set of tolerances so fine, that even ants would have a tough time complying with.  

 In the box

  • Core Ti - Titanium Pendant
  • CR2016 3V battery (installed)
  • Stainless Steel Ballchain necklace
  • Titanium Pendant Clasp  (pre-attached to CoreTi by default)
  • Usage Manual
    • Length: 36mm
    • Width: 25mm
    • Thin: 4.8mm
    • Weight: 10 grams (with battery)

    LED: 3mm, round led, broad beam angle

    Switch: Electronic On/Off 
    Push once for ON, push again for OFF
    Hold button for 3 seconds from the OFF position to enter SOS (slow flashing mode)
    Push button again to switch OFF

    Batteries Supported:
    • 1x CR2016 (3V lithium) 

    Typical Runtime:  35 hours

    Splash Proof, NonCorrosive, NonAllergenic

     Titanium Clasp: I'll be attaching these as the default as they are a little tricky to install without the right tools but if you'd prefer the clasp unattached, please let me know.

    New Brushed Version: pictured in the last photo above (on the right side). These are brushed by hand using a rotary wire brush.

    Please note the minimum shipping fee is $7 (additional shipping options are available at checkout). For more details please visit the Shipping FAQ.

    #CPF Members: 
    Please feel free to include your CPF name in the special instructions section.

    Unconditional Satisfaction Guarantee
    If for any reason, you are not delighted with your MBI CoreTi™, simply take it to the post office, within 30 days of receiving it, and mail it back for a full refund. All I ask is that you pay for the postage. 

    Quality Assurance 
    Please also note that each MBI CoreTi™ is finished and assembled by hand. This means that whilst each MBI CoreTi™ will be created to a fine tolerance in terms of size and finish, each will be unique when examined under a magnifying glass. I inspect each CoreTi personally and give each a final hand polish before carefully packing.

    Under normal lighting, the finish will appear highly polished but depending on the angle of light, on close inspection you may still notice very fine lines or patterns which are usually a result of the machining process. This is normal. The brushed version is hand finished using a wire brush tool and will help mask fine scratches better than the polished version.

    The CoreTi is an extremely difficult and time consuming product to make. For every one that ends up in the hand of a customer, at least 2 more have been rejected at some part of the creation process which 
    requires individual fine tuning, a plethora of patience and slow attention to fine detail. I do hope to keep offering them in the future but do feel welcome to contact me if you'd like an update on timing.

    Please feel most welcome to contact me if there are any questions you have.
    I'm always happy to answer no matter how big or small.